HOW TO TROUBLE-SHOOT YOUR GUN:

 

         1. Unscrew the back of the wand

         2. Loosen the SCREW from the NEEDLE 

               DO NOT REMOVE ANY PIECES COMPLETELY


          3. Loosen the BOLT closest to the trigger (shown above) 

               DO NOT REMOVE ANY PIECES COMPLETELY


          4. Reset NEEDLE by pulling it out slightly, not completely, 

               and pushing it gently all the way back in. 

               Be careful not to bend the NEEDLE.


          5. Tighten BOLT


          6. Tighten SCREW


          7. Screw the back of the wand (Cap) back on


          8. Test the wand



NOTE: If the trigger is loose, this means that the needle is not pushed in all the way. To fix this, repeat steps 1-8 and push needle in all the way.